Plan 65646BS: Southern Coastal Home Plan with Two Master Suites

Plan 65646BS

Southern Coastal Home Plan with Two Master Suites

Heated S.F.

2768

Beds

Baths

Stories

Cars

Plan 65646BS

Southern Coastal Home Plan with Two Master Suites

Heated S.F.

3,810

Beds

Baths

3.5

Stories

Cars

What's Included

Floor Plan

Main Level

2nd Floor

Lower Level

Plan Details

This Southern Coastal home plan features a 2-car, tandem garage on either side of the foyer.
Take the square-shaped staircase, or elevator, to find an open-concept living space that merges the great room with the eat-in kitchen.
A deep-bowl sink in the kitchen overlooks the dining area, and beyond to the covered lanai, while a quiet study nearby provides a space to read or get some work done.
The master suite is located on the main level and includes french doors to the back porch. Two walk-in closets and a spacious bathroom with 5 fixtures complete the homeowner's oasis.
Upstairs, discover a second master suite, along with the third bedroom, surrounding a generous den that extends onto a covered balcony.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Plans include the following:

Elevations:

Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans:
Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan:
Drawn at 1/8″ to 1/4″ = 1’0″ Scale

Roof Design Plan:
Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections:
Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections:
Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.

These items are NOT included:

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

What's Not Included

Architectural or Engineering Stamp
Site Plan
Mechanical Drawings (location of heating and air equipment and duct work)
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
Framing layouts with beam sizes and locations
Energy calculations
Materials list - MAY be available as a purchasable option under the "Options" tab